General Category > Quadrajet Carb Talk and Tips

Base Gasket

<< < (3/3)

Cliff Ruggles:
I'd use our thick 1/4" 4 hole gasket if carb height is not an issue.  It's available directly off the website, or call the shop and we'll get one headed your way.  Did you use one of our kits for the carb build?   We can put any base gasket in the kit if you tell us what you are doing, etc.......Cliff

Paul:
The carb was already rebuilt when I bought it. I re-re built it using your book, kept and reused all the gaskets because they was new, but I bought your float and needle and seat, pump, jets and primary and secondary rods, and the little steel ball thats for the accelerator pump. Its ready to be installed, I just need a base gasket that will work with the 17057266 carb, being mounted on the 71 intake.

Navigation

[0] Message Index

[*] Previous page