Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: Ethan1 on June 28, 2012, 05:11:59 PM

Title: 1970 Rochester Two-Jet
Post by: Ethan1 on June 28, 2012, 05:11:59 PM
 I have a Rochester Two-Jet. Part number 7040436. I notice there is a plug on the air horn and what looks to be an APT system right by the power valve. Is it an adjustable part throttle?

 Thanks!
Title: Re: 1970 Rochester Two-Jet
Post by: Cliff Ruggles on July 03, 2012, 10:17:52 AM
Can you post a pic of it......Cliff
Title: Re: 1970 Rochester Two-Jet
Post by: Ethan1 on July 03, 2012, 10:56:04 AM
Can you post a pic of it......Cliff

 I took a look again and that plug is not over this screw by the power valve, so I didn't take a pic of the plug. The plug is right near the accelerator pump.

 Here is a pic of that screw by the power valve.

 (http://i144.photobucket.com/albums/r184/Ethan1849/IMG_0025.jpg)

 
Title: Re: 1970 Rochester Two-Jet
Post by: Cliff Ruggles on July 04, 2012, 05:01:44 AM
"Screw by the power valve".  I see a cup with a feed hole leading down to the APT screw.  This was used on some late model 2GC units.   Here is some good reading on it, with pics:

http://books.google.com/books?id=DwUMAaiyMoYC&pg=PA154&lpg=PA154&dq=Rochester+2GC+apt+system&source=bl&ots=02Uo1coIuw&sig=IPslXBqghHTnrTdWSVtCBPuRQmY&hl=en&sa=X&ei=8i_0T53XD8na2wWJ09TEBg&ved=0CEoQ6AEwAg#v=onepage&q=Rochester%202GC%20apt%20system&f=false
Title: Re: 1970 Rochester Two-Jet
Post by: Ethan1 on July 04, 2012, 05:22:23 PM
"Screw by the power valve".  I see a cup with a feed hole leading down to the APT screw.  This was used on some late model 2GC units.   Here is some good reading on it, with pics:

http://books.google.com/books?id=DwUMAaiyMoYC&pg=PA154&lpg=PA154&dq=Rochester+2GC+apt+system&source=bl&ots=02Uo1coIuw&sig=IPslXBqghHTnrTdWSVtCBPuRQmY&hl=en&sa=X&ei=8i_0T53XD8na2wWJ09TEBg&ved=0CEoQ6AEwAg#v=onepage&q=Rochester%202GC%20apt%20system&f=false

 Thank you, Cliff. Sorry, didn't know what else to call it. :D