Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Diagnose a Quadrajet carburetor problem => Topic started by: blazer74 on February 20, 2013, 04:30:52 PM

Title: Screw in Bypass air bleeds
Post by: blazer74 on February 20, 2013, 04:30:52 PM

Hello, Question about screw in bypass air bleeds, Do you put them in the down channel passage on the top of the throttle plate or do they go in the actual holes in the bores? If they are placed in the top of the throttle plate does this affect the sizing by not being directly in the bores?

Thanks Craig

Title: Re: Screw in Bypass air bleeds
Post by: 77cruiser on February 21, 2013, 01:31:15 PM

I've done it like that & it worked fine.

Title: Re: Screw in Bypass air bleeds
Post by: blazer74 on February 21, 2013, 09:21:12 PM

Thanks for your input, was just wondering if relocating the
Bleeds affect sizing.     Craig