Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Quadrajet Parts and Numbers => Topic started by: Monte71 on April 02, 2013, 09:37:27 AM

Title: Help With Part # to Rebuild
Post by: Monte71 on April 02, 2013, 09:37:27 AM

Hi Guys

New to the forum,looks like lots of knowledge around here.

I have a 1971 Monte Carlo,SS454 car,that i purchased last July.

Right now it has a Holly 850 dp on it,with manual choke(not hooked up) sitting on a Edelbrock Performer 2.0 intake.

My question is,can you suggest a 76 or later Q-jet part number (with electric choke ) that would work?

I could use original p/n 7041200,but it uses the divorced choke setup with the linkage mounted on the manifold(not sure if this would work properly with my intake) I would prefer electric.

Thanks-Shawn

Title: Re: Help With Part # to Rebuild
Post by: Shark Racer on April 02, 2013, 06:16:27 PM

Any of the Chevy car carbs should be fine. Corvette, Camaro, etc.

What's the P/N on the intake? If it doesn't have the divorced choke box a 4MV will not work.

Any M4MC can be converted to electric choke w/ the choke kit from Cliff.

Title: Re: Help With Part # to Rebuild
Post by: Monte71 on April 03, 2013, 06:57:57 AM

Found a 17082213,

What do you guys think?

Shawn

Title: Re: Help With Part # to Rebuild
Post by: Shark Racer on April 03, 2013, 02:16:19 PM

I'd use it :)

Title: Re: Help With Part # to Rebuild
Post by: omaha on April 03, 2013, 10:13:26 PM

...YYUUUUUUPP.....I think good choice also..

Title: Re: Help With Part # to Rebuild
Post by: Ethan1 on April 04, 2013, 10:26:56 AM

 I agree as well.