Cliff's Quadrajet Parts and Rebuild Kits
Quadrajet Problem Solving => Buy Quadrajet Parts, Quadrajet Kits, Service => Topic started by: kenn on June 30, 2013, 12:48:58 PM
-
Hello, I am attempting to complete this rebuild for the engine in my 72 C10 the eng is 350+30, performer intake,202 heads,224/230/110 cam. I know I need the idle tubes,secondary jets, rods and hanger and the rebuild kit. The jets that were in it were 74s. If I should use a different size include them. I think I should use new rods here also. I am not sure whats in the kit as far as screws and springs.
Some of the measurements are: Idle down channel .051
Upper idle air bleed .046
Lower idle air bleed .076
Main air bleed in air horn .086
Mixture screw holes .0625
Thanks for the help.
-
Fastest way to get this taken care of is to call the shop... and Cliff is awesome to talk to. :)
-
Fastest way to get this taken care of is to call the shop... and Cliff is awesome to talk to. :)
What Steve said. Cliff is a GREAT guy to talk to. He will help you greatly with what you need for your carb. ;)
-
Kits are best ordered by calling the shop, that's why we don't offer them directly off the website. In most cases we put custom kits together exactly for the application....Cliff
-
Hello. I'll call today when I get home from work. I'm just a guy rebuilding a carb for my daily driver I dont race or anything like that.
-
Hello I talked to cliff about the parts that I needed and they were sent right out. He is a very busy man but willing to help with what I needed. Now I have to start putting this together, I hope I can remember where to put the restrictions he sent. Thanks K.E.N.
-
Hello I talked to cliff about the parts that I needed and they were sent right out. He is a very busy man but willing to help with what I needed. Now I have to start putting this together, I hope I can remember where to put the restrictions he sent. Thanks K.E.N.
Cliff's the man! 8)
-
I am so confused by the air bleeds I hope I got this right...
-
Well I think I got it correct but I'm missing the link for the front pull-off. One other thing the directions with the kit were no help at all. Good thing the library is up the street.