Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: bober on December 21, 2013, 06:42:14 PM

Title: adj. screw for choke flap setting
Post by: bober on December 21, 2013, 06:42:14 PM

17080272 carb E/choke screw adj. starting point and correct procedure to adjust ? 76 Pont 350 eng. E/b intake .Thanks

Title: Re: adj. screw for choke flap setting
Post by: Cliff Ruggles on December 26, 2013, 03:53:39 AM

Compress the primary pull-off and adjust the choke flap so it opens about 1/4" or so. 

The e-choke is set so that it just closes the choke flap. 

Fast idle speed will need to be set on cold start-up, while fine tuning the choke flap angle....Cliff