Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Dialing in your rebuilt Quadrajet carburetor => Topic started by: billy 2 on January 12, 2014, 03:52:18 PM

Title: Recipe
Post by: billy 2 on January 12, 2014, 03:52:18 PM

I need a recipe for a carb rebuild #17057204.  It is going on a 454 engine; stock rebuild; it does have an Edelbrock performer intake manifold Crane cam #134122(that's a stock replacement cam)210/218 duration @.050 off 114 Degrees of L/S. Gross lift .502 Int./Exh. and headers.  The car is a first generation Camaro, 1968, 4-speed, 12-bolt posi 355 gears in the rear end.  What I need is a recipe for the carburetor to use on that engine.  The engine has 8.5 - 9.0 compression.    billy2

Title: Re: Recipe
Post by: Cliff Ruggles on January 17, 2014, 12:08:47 PM

Billy, when you get time, call the shop and we can set you up with everything required to dial that carb in exactly for the application, saves a lot of typing as well....Cliff

Title: Re: Recipe
Post by: billy 2 on January 17, 2014, 04:47:18 PM

Thanks Cliff  I'll give you a call.  billy