Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Buy Quadrajet Parts, Quadrajet Kits, Service => Topic started by: 428Bird on January 25, 2014, 02:59:15 PM

Title: I would like to order a kit for a 17058276
Post by: 428Bird on January 25, 2014, 02:59:15 PM

I would like to order a HP rebuild kit for my Q-Jet. My combination is as followed:

1970 Pontiac 400, 4" stroke, .030" over (approx. 433 CI)
Edelbrock 87CC heads, approx. 9:1 CR
XR-288-HR cam with 1.5 Rockers. Cam specs are: 288/294 @ 0.006, 236/242 @ 0.050, 110 LSA, .520/.540 lift
Performer Intake
Stock fuel pump/lines/tank
Stock distributor/wires/etc...
T-10 four speed, 3.42's, stockish tires (255/60r15's)

This is going into a 1975 Trans AM that will see street driving.

The main body and air horn are free of warping and the throttle bushings seem tight. I may need the choke pulloff.

Thanks!

Britt Bettell
281-620-5945

Title: Re: I would like to order a kit for a 17058276
Post by: Cliff Ruggles on February 01, 2014, 04:00:19 AM

Britt, shop office hours are 9am-4pm M-F EST.  If we don't pick up, leave a message and good number and someone will call you back....thanks....Cliff