Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: gwgdog66 on March 25, 2014, 06:49:35 PM

Title: Holley 4175 Question
Post by: gwgdog66 on March 25, 2014, 06:49:35 PM

I found a decent 4175 spread bore Holley I would like to use as a spare, in the event My Q-Jet ever needs to be taken off my engine for repair/rebuild. This is a divorced choke Holley.

I have a 2701 Edelbrock performer intake. Will the Edelbrock  PN# 1931 divorce choke kit work with the Holley carb?

Thanks

Gary

Title: Re: Holley 4175 Question
Post by: Ethan1 on March 29, 2014, 06:55:11 PM

Quote from: gwgdog66 on March 25, 2014, 06:49:35 PM

I found a decent 4175 spread bore Holley I would like to use as a spare, in the event My Q-Jet ever needs to be taken off my engine for repair/rebuild. This is a divorced choke Holley.

I have a 2701 Edelbrock performer intake. Will the Edelbrock  PN# 1931 divorce choke kit work with the Holley carb?

Thanks

Gary

 I bet you could. Wouldn't hurt to try.

Title: Re: Holley 4175 Question
Post by: gwgdog66 on March 31, 2014, 08:41:47 PM

Thanks. It looks like it will. There is two places to hook the D choke rod up for push close or pull close. I'm going to give it a try.

Title: Re: Holley 4175 Question
Post by: gwgdog66 on April 04, 2014, 10:08:34 PM

The choke will work if the cover isn't put on. here is a short video.

(http://i652.photobucket.com/albums/uu241/gwgdog66/85%20El%20Camino/th_Holley4165_zps3e0818bc.jpg) (http://i652.photobucket.com/albums/uu241/gwgdog66/85%20El%20Camino/Holley4165_zps3e0818bc.mp4)

Title: Re: Holley 4175 Question
Post by: Ethan1 on April 12, 2014, 06:39:27 AM

Quote from: gwgdog66 on April 04, 2014, 10:08:34 PM

The choke will work if the cover isn't put on. here is a short video.

(http://i652.photobucket.com/albums/uu241/gwgdog66/85%20El%20Camino/th_Holley4165_zps3e0818bc.jpg) (http://i652.photobucket.com/albums/uu241/gwgdog66/85%20El%20Camino/Holley4165_zps3e0818bc.mp4)

 Glad it works, but not glad the cover doesn't clear the linkage. :(