Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: fleetman on June 17, 2014, 08:25:02 AM

Title: 200-4r throttle valve bracket set up !!!
Post by: fleetman on June 17, 2014, 08:25:02 AM

hello- looking for bracket recommendation for my q-jet 17059222 throttle valve cable.
and any such advice on set up.
my truck is 1966 c-10 gm crate motor 350/350/400 tq  and the 200-r4 trans.
thanks
paul

Title: Re: 200-4r throttle valve bracket set up !!!
Post by: 77cruiser on June 17, 2014, 10:35:56 AM

This is the one I'm using.

http://www.summitracing.com/parts/tci-376700/overview/

Title: Re: 200-4r throttle valve bracket set up !!!
Post by: fleetman on June 17, 2014, 03:47:50 PM

thanks. what are you using for carb geometry bracket/setup ?

Title: Re: 200-4r throttle valve bracket set up !!!
Post by: 77cruiser on June 19, 2014, 06:34:18 AM

Like this.

http://www.purplesagetradingpost.com/sumner/techinfo/700R4p1.html