Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: firefox3 on July 19, 2014, 07:49:00 PM

Title: Edelbrock 1910 Main Air Bleed Size...
Post by: firefox3 on July 19, 2014, 07:49:00 PM

Can someone tell me what size main air bleed the Edelbrock 1910 came with?

Thanks...

Title: Re: Edelbrock 1910 Main Air Bleed Size...
Post by: novadude on July 31, 2014, 06:41:08 PM

Might be in Cliff's book, but as I recall, mine was 0.046", and it came with small 72 jets to match the small bleeds.

Title: Re: Edelbrock 1910 Main Air Bleed Size...
Post by: firefox3 on August 01, 2014, 07:49:10 PM

I was thinking they were less than .050", but wasn't sure.

Thanks novadude...

Title: Re: Edelbrock 1910 Main Air Bleed Size...
Post by: Cliff Ruggles on August 08, 2014, 04:29:07 AM

Correct, they are close to .046".  Edelbrock typically use 74 main jets in those carburetors, but the rest of the calibration was all over the place.  I've seen at least 4 completely different set-ups with the 1910's, so you never know what you are going to find with them....Cliff