Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Buy Quadrajet Parts, Quadrajet Kits, Service => Topic started by: Ethan1 on September 13, 2014, 03:40:11 PM

Title: Primary Choke Pull-Off/Bracket
Post by: Ethan1 on September 13, 2014, 03:40:11 PM

 Cliff,
 On my DualJet 165, the choke pull-off is on a bracket that has two "ears" or "lips" holding it on. I have the new pull-off, but cannot get the old one out of the bracket to put the new one in. Old one does not hold vacuum anymore. Would you be able to do it? Thanks, Ethan.

Title: Re: Primary Choke Pull-Off/Bracket
Post by: Ethan1 on September 13, 2014, 03:43:18 PM

 Forgot to add the DualJet carb number is 17056156. Thank you.

Title: Re: Primary Choke Pull-Off/Bracket
Post by: Ethan1 on September 13, 2014, 07:35:15 PM

 Nevermind, used a pair of snap-ring pliers and spread them apart CAREFULLY. Got the old one out.

Title: Re: Primary Choke Pull-Off/Bracket
Post by: Cliff Ruggles on September 18, 2014, 03:31:03 AM

They can be stubborn, but we usually get them out with a little help from a large flat tip screwdriver.  Most will push the retaining arms out of the way when you pry them out of the bracket.....Cliff