Cliff's Quadrajet Parts and Rebuild Kits
General Category => Quadrajet Carb Talk and Tips => Topic started by: fussfeld on January 10, 2016, 07:07:24 AM
-
What type of A/N fitting can go into the fuel inlet nut? i also noticed pictures of this on pages 44 and 88 in the book.
-
What type of A/N fitting can go into the fuel inlet nut? i also noticed pictures of this on pages 44 and 88 in the book.
What year carb are we talking about here? There are several A/N fittings to choose from. Both 7/8" and 1". Cliff might even carry them. Might give him a call.
-
It's actually a 2G and i think i found something that will work for either a 2G or quadrajet:
http://www.summitracing.com/parts/rus-640380/reviews/
i need something that will screw into the STOCK fuel inlet nut, not the actual fuel bowl. This is because the A/N fuel inlet going directly into the bowl for a 2G won't allow me to use the stock fuel filter. However, the A/N fuel inlet for a quadrajet WILL allow the use of a stock filter.
-
It's actually a 2G and i think i found something that will work for either a 2G or quadrajet:
http://www.summitracing.com/parts/rus-640380/reviews/
i need something that will screw into the STOCK fuel inlet nut, not the actual fuel bowl. This is because the A/N fuel inlet going directly into the bowl for a 2G won't allow me to use the stock fuel filter. However, the A/N fuel inlet for a quadrajet WILL allow the use of a stock filter.
Yep, that should work. I assume you are using -6 A/N line then?
-
We drill and tap the fuel filter housings for NPT threads, then you can install any AN fitting that you want.....Cliff
-
Yep, that should work. I assume you are using -6 A/N line then?
Yes.