Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Buy Quadrajet Parts, Quadrajet Kits, Service => Topic started by: AspenW41 on March 26, 2016, 11:58:56 PM

Title: Help on sizes of rods and jet size for CCC Quadrajet carb
Post by: AspenW41 on March 26, 2016, 11:58:56 PM

Cliff,
   I have a 1986 Pontiac Firebird w/a LG4. I put on a Edelbrock Intake, and a set of headers, along with a single 3" exhaust (w/ Holley crossflow muffler), AND replaced the OEM cam (179 @.050s) with a COMP CAM 260H (212@.050s), also with a 50K volt coil with a plug gapp off .055s. I am looking to rebuild the CCC carb. I was looking at your HP kit, and I wanted to know what rod and jet sizes would you recommend to get for this car.

Title: Re: Help on sizes of rods and jet size for CCC Quadrajet carb
Post by: Cliff Ruggles on March 29, 2016, 01:20:52 AM

When you get time call the shop, we'll get what you need in a custom kit exactly for what you are doing....tks....Cliff

Title: Re: Help on sizes of rods and jet size for CCC Quadrajet carb
Post by: AspenW41 on May 02, 2016, 01:54:42 PM

Cliff,
   I just called. Got your answering machine. I wanted to get a Quote on how much the jets and metering rods would be from you, in addition to SR kit.  :)

Title: Re: Help on sizes of rods and jet size for CCC Quadrajet carb
Post by: Cliff Ruggles on May 03, 2016, 02:17:41 AM

The primary side jets and metering rods are not replaced in those unit, part throttle A/F is controlled by the M/C solenoid.

Secondary metering is not computer controlled, and it will need richer metering rods for what you are doing.  Call volume was heavy yesterday, I'll be returning all calls sometime today......Cliff