Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Quadrajet Parts and Numbers => Topic started by: 77cruiser on June 22, 2016, 05:32:22 PM

Title: Specs for a 17080212
Post by: 77cruiser on June 22, 2016, 05:32:22 PM

Thanks Ethan. :)

Title: Re: Specs for a 17080212
Post by: carmantx on June 22, 2016, 08:30:41 PM

I dont have a spec book, but I do keep records of what I find.  Might be helpful.
It is a large casting, 800 cfm
72 jets with 52 rods.
DH secondary rods
MAB upper .051  lower .042
IAB upper .069  lower.060
Idle tube .038
DCR .050

Title: Re: Specs for a 17080212
Post by: Ethan1 on June 23, 2016, 12:13:04 AM

Quote from: 77cruiser on June 22, 2016, 05:32:22 PM

Thanks Ethan. :)

 .072 Primary Jets
 52M Primary Metering Rods
 DH Secondary Metering Rods

 Pretty much, what Carman posted. Good to know internal orifice sizes as well. :)

Title: Re: Specs for a 17080212
Post by: 77cruiser on June 23, 2016, 05:54:38 AM

Thanks Carman & Ethan. Just wanted to see if it was going to be mess with when I took it apart.
Is this a 454 motor home carb?

Title: Re: Specs for a 17080212
Post by: Ethan1 on June 23, 2016, 09:58:04 AM

Quote from: 77cruiser on June 23, 2016, 05:54:38 AM

Thanks Carman & Ethan. Just wanted to see if it was going to be mess with when I took it apart.
Is this a 454 motor home carb?

 Yep. 1980 Chevrolet P30 Motorhome 454cid A/T.