Cliff's Quadrajet Parts and Rebuild Kits
General Category => Lobby => Topic started by: Mr.Pontiac on July 03, 2016, 05:24:18 AM
-
373 gears, race trans, 4000 Contin. stahl. Ederbrock rpm heads 72 cc,s 1.65 rockers 800 cfm carb. by cliff. 1.7/8 tube headers. HEI plus RPM intake. best et 12.50 at 106. I personally fill its a 12.0 car. tryed timng, Recantly being told it just may be the RPM daul plane intake???I just bought a Torker.Timing at 38 degree,s. Crower cam hrdralic, 1.65 Rockers. Cutting a 60 lite pretty good but the 60 fters 1.88 ??? Car does not fill like its spinng. Anybody got any ideas??? All ears!!!
-
i don't know what size tires your running but 373 should have that engine buzzing. what rpm does the cam make the most torque?what rpm are you crossing the line?i have 3.73 in a 08 ford 6.4 diesel .never had it on the track but it would be a good race . puts down about 525 to the rear wheels. it will lite the tires till 80 when it hooks up. if I'm going to race someone i have to put it in 4wd to come out of the hole.i also have overdrive so were comparing fruit to steak. fwiw