Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Dialing in your rebuilt Quadrajet carburetor => Topic started by: hoopty on March 04, 2010, 02:46:52 AM

Title: main jets
Post by: hoopty on March 04, 2010, 02:46:52 AM

can you drill out the main jets

Title: Re: main jets
Post by: Cliff Ruggles on March 05, 2010, 04:06:41 AM

Yes, but it is not recomended.  A typical drillbit only cuts on two sides at once, so quite likely the hole will not be precise. 

Replacement jets were flowed and stamped, or at least they used to be.....Cliff