Cliff's Quadrajet Parts and Rebuild Kits

General Category => For Sale / Wanted => Topic started by: Jeffs68 on August 29, 2016, 12:59:22 PM

Title: FOUND - Wanted: 68-71 Pontiac primary shaft
Post by: Jeffs68 on August 29, 2016, 12:59:22 PM

Looking for the primary shaft for a 68-71 Pontiac Qjet, I'll take the base plate and secondary shaft also if you don't want to separate them.

Send a PM if you have what I need.

Thanks!

Title: Re: Wanted: 68-71 Pontiac primary shaft
Post by: carmantx on August 29, 2016, 07:37:28 PM

You can get these reproduction if you can't find good originals.

Title: Re: Wanted: 68-71 Pontiac primary shaft
Post by: Jeffs68 on August 30, 2016, 06:33:19 AM

Thanks, I do have the repro shaft. Junk chinese metal. The throttle moves smooth when COLD, but after the engine is warmed up the metal is expanding too much and binding. Won't return to idle unless you push back the throttle arm.

Tried it in 2 different base plates, both bushed and true. Both had the same results.

Title: Re: Wanted: 68-71 Pontiac primary shaft
Post by: Jeffs68 on September 03, 2016, 04:42:35 PM

bump

Title: Re: Wanted: 68-71 Pontiac primary shaft
Post by: Ethan1 on September 04, 2016, 02:09:07 AM

Quote from: Jeffs68 on August 29, 2016, 12:59:22 PM

Looking for the primary shaft for a 68-71 Pontiac Qjet, I'll take the base plate and secondary shaft also if you don't want to separate them.

Send a PM if you have what I need.

Thanks!

 Have you tried contacting Mr. Pontiac? He may have what you need. ;)

Title: Re: Wanted: 68-71 Pontiac primary shaft
Post by: Jeffs68 on September 04, 2016, 09:24:56 AM

Quote from: Ethan1 on September 04, 2016, 02:09:07 AM

Have you tried contacting Mr. Pontiac? He may have what you need. ;)

Thanks Ethan, I'll send him a message.

Title: Re: Wanted: 68-71 Pontiac primary shaft
Post by: Jeffs68 on September 15, 2016, 05:59:16 PM

Mr. Pontiac (Rich) came through, got the part I needed!

Title: Re: Wanted: 68-71 Pontiac primary shaft
Post by: Ethan1 on September 16, 2016, 01:55:40 AM

Quote from: Jeffs68 on September 15, 2016, 05:59:16 PM

Mr. Pontiac (Rich) came through, got the part I needed!

 Great to hear, Jeff! I knew he would.