Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: 77cruiser on June 29, 2010, 08:56:45 PM

Title: 63 pri jet
Post by: 77cruiser on June 29, 2010, 08:56:45 PM

Never seen one that small. Carb no. 17057213 single AB 40B rod.

Title: Re: 63 pri jet
Post by: Cliff Ruggles on June 30, 2010, 04:23:09 AM

Pretty "oddball" carb, early design with single main airbleeds, divorced choke.  We free up the APT screw in the baseplate, open up the MAB slightly and install a .070" main jets with the 43B metering rods.....Cliff

Title: Re: 63 pri jet
Post by: 77cruiser on June 30, 2010, 08:59:49 AM

Thanks Cliff!

Where would you go with MAB size to run off the 63 jet/no rods, might do another oval track one?

I haven't measured the MAB exactly but it's smaller than .062, I'm thinking if I go to about .065 - .07.