Cliff's Quadrajet Parts and Rebuild Kits
Quadrajet Problem Solving => Buy Quadrajet Parts, Quadrajet Kits, Service => Topic started by: MrEarl on June 30, 2019, 04:57:52 PM
-
Not fining a rear pull off for '79 403 Quadrajet on a '79 Buick Estate Wagon carb #17059553 in your store Cliff. Can you please direct me
-
We don't stock them do to lack of interest and that the rear pull-off isn't needed on those models.
At most I get an inquiry once or twice a year for them, and we don't use them on any of the later carbs we build here as custom units, just the front one.
Many of those will also have a bleed hole in them so them come in slow, which is a vacuum leak and sucks in dirty unfiltered air......Cliff
-
Yea, sorta figured that, I had read that in your book but am trying a couple band aid things on mine (replacing chokes and accelerator pump) until I can get it to you for a full rebuild. It is on an Estate Wagon we use to pull a 26 ft Airstream and have a couple trips planned. While I've got you, whats the current turnaround time for a complete rebuild right now.
-
so let me ask, if as you say they aren't needed, can I simply disengage the one on my carb or?
-
If your carb has a front pull-off that opens the choke and has a link up to the secondary airflap shaft you don't need the rear pull-off. It can be removed or just put a steel ball in the hose going to it........Cliff