Cliff's Quadrajet Parts and Rebuild Kits

General Category => Lobby => Topic started by: musclecarman15 on January 24, 2020, 09:25:07 AM

Title: porting iron #64 heads
Post by: musclecarman15 on January 24, 2020, 09:25:07 AM

am wanting to have my 1970 factory #64 D port heads ported along with my 1970 factory cast iron intake...heads have factory 2.11/1.77 size valves and screw in studs...would like to achieve 250-260cfm...need recomendations,thx ,they are on my factory 1970 455 yc motor.

Title: Re: porting iron #64 heads
Post by: Cliff Ruggles on January 25, 2020, 05:49:06 AM

Dave at SD Performance in BC Canada has done several sets for us.

Another source is Kauffman Racing Equipment right here in Ohio.....