Cliff's Quadrajet Parts and Rebuild Kits
Quadrajet Problem Solving => Diagnose a Quadrajet carburetor problem => Topic started by: Gio_84 on March 11, 2022, 01:50:25 PM
-
Hi guys
please look at this video and please tell me if this could be a problem or it is a common situation.
https://youtu.be/1b3lnGMXF-c
tanks
Gio
-
Seems odd but it's normal.
-
Use a 1/8" pin gauge:
-
I already have followed the choke setting procedure. when engaged, with engine cold, the flap is firmly in place and completely closed.
the play is due to the holes that are larger than the rod. is this because of the wear?
was like this also when it was new?
Thanks
-
It was made like that. After the engine cranks the choke pull-off
takes a little bit of choke off. The slot allows the choke blade to
crack open a little more commensurate with engine air flow.
It's kind of a balance. Very clever design.
-
I already have followed the choke setting procedure. when engaged, with engine cold, the flap is firmly in place and completely closed.
the play is due to the holes that are larger than the rod. is this because of the wear?
was like this also when it was new?
Thanks
Your video shows you´ll have to bend the rod some to keep the chokeblade fully closed when choke is fully engaged.
FWIW
-
thnks for your reply
https://youtu.be/vaBGuQ1nFKg
as you can see here, when engaged the flap is blocked.
the play come when the flap is open.
-
What's it look like when hot?
-
Push that counterweight/lever down and hold it. Don't let up.
That will simulate the bimetallic coil opening force when
totally warmed up Then there will still be a little bit of choke
flap looseness.The choke flap doesn't hard open it will always
rattle just a bit.
-
QUADRAJAM is correct, not a problem, it is part of the design.
-
Push that counterweight/lever down and hold it. Don't let up.
That will simulate the bimetallic coil opening force when
totally warmed up Then there will still be a little bit of choke
flap looseness.The choke flap doesn't hard open it will always
rattle just a bit.
here we are
https://youtu.be/Kqi5zkHld4I
-
What's it look like when hot?
That´s what i would like to see, too.
-
Hi guys
https://youtu.be/V6QmhGfOFHw
here you can see the engne warm up
sorry for the audio quality but it was very windy this afternoon..