Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Dialing in your rebuilt Quadrajet carburetor => Topic started by: Bills64 on January 06, 2023, 01:22:23 PM

Title: Primary throttle angle
Post by: Bills64 on January 06, 2023, 01:22:23 PM

I have attached a pic showing the primary throttle angle just before the secondaries start to open. Is this the proper angle?
Thx

Title: Re: Primary throttle angle
Post by: Kenth on January 07, 2023, 05:55:52 AM

I have found this adjustment works as intended.
When upper end of link just touches the tang, the lower part of link should be in center of slot.
Bend link to adjust (do not bend the tang as you´ll see in some instructions).

HTH