Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: R4lN on June 08, 2023, 05:15:44 AM

Title: 17059506
Post by: R4lN on June 08, 2023, 05:15:44 AM

Hi Cliff, I just ordered a rebuild kit from you for this carburetor.  Upon closer inspection I have noticed that its missing the vacuum canister and rod for the secondaries.  Do you mind taking a peek at these photos to make sure the rest of it is there and let me know what I need to order. Reference photo attatched. Thanks!

Title: Re: 17059506
Post by: Cliff Ruggles on June 09, 2023, 02:43:30 AM

You are missing the pull-off and both links, plus the screws to attach it to the carb.

I have the pull-offs, screws and lower link, but currently the short link is out of stock.  I just went thru a huge pile of used parts and sold the last one I had couple of days ago......

Title: Re: 17059506
Post by: R4lN on June 09, 2023, 11:19:59 PM

Ok, I will wait and bump this thread every so often to see if you have gotten the rods im missing.  Ty

Title: Re: 17059506
Post by: Cliff Ruggles on June 10, 2023, 05:10:43 AM

I'm only out of the short one.  I may have a few in the back room on some old cores.  I'm doing a complete shop clean up and going thru everything over the next few weeks so may find a few of them.....

Title: Re: 17059506
Post by: R4lN on June 12, 2023, 01:54:58 PM

Ok. Just keep me posted if you happen to come across one.  Thanks

Title: Re: 17059506
Post by: R4lN on July 22, 2023, 02:19:03 AM

Hey Cliff just checking back to see if you ever came across the linkage that we were missing. Thanks in advance