Cliff's Quadrajet Parts and Rebuild Kits
Quadrajet Problem Solving => Buy Quadrajet Parts, Quadrajet Kits, Service => Topic started by: emarkay on November 17, 2010, 03:43:11 PM
-
E4ME - 17084209
SR kit - Need to confirm it comes with the round M/C solenoid gasket.
If not, who do you recommend for a rebuild kif that is does not have the common "stamped from rice paper" gaskets, accelerator pump made from used dental rubber bands and "cast from half-empty light beer cans" pump shaft and the like.
I am sure your kits are not of that ilk, but I don't see a specific mention of 198x vintage electronic Q-jets.
****
Recall we spoke a while back on the issues of getting a rebuilt E4ME carb - that was a fiasco, remember? Anyways, I Marine Tex'd my original 17084201 carb - but did not do the plugs under the base plate, and, apparently one of them is leaking, too - the fuel drains out of the bowl in a day or so. (Other than that, it's a 55K mile original that gives no trouble.)
I got a 17084209 on eBay for $35 bucks that looks dusty but intact, so I want to crack it open and rebuild it. Then I will try to cut away the marine tex on the original carb's baseplate and then get to the other 4 plugs. (Also, what would be the price on a 17084201 base place to throttle body gasket?)
Thanks again for your excellent assistance earlier, and I wanted to ask you first on this current request.
MRK
-
Yes, our kits have the rubber seal, and the complete upgraded accl pump assemblies with new springs/retainer. All the gaskets and small parts are included, and a fastener set so you can use one flat blade screwdriver instead of torx bits.....Cliff