Cliff's Quadrajet Parts and Rebuild Kits
General Category => Quadrajet Carb Talk and Tips => Topic started by: Cadman-iac on November 07, 2025, 02:37:27 AM
-
Looking through Cliff's book at the 1st recipe, it lists the secondary POE restriction as being .052" to .055".
I've looked through this book multiple times and I can't find where this restriction is pointed out.
Am I just blind, or did it not make it into the book?
Can someone please tell me where this restriction is? Many thanks, Rick
-
The secondary POE restrictions are located in the air horn at the front edge of the air valves.
Most are above the edge, some at the edge and a few under the edge.
-
The secondary POE restrictions are located in the air horn at the front edge of the air valves.
Most are above the edge, some at the edge and a few under the edge.
So what Cliff is calling the POE restriction is what is also referred to as the secondary accelerator nozzles?
Just a matter of terminology causing the confusion. Thanks for the explanation Kenth.
Rick
-
So what Cliff is calling the POE restriction is what is also referred to as the secondary accelerator nozzles?
Just a matter of terminology causing the confusion. Thanks for the explanation Kenth.
Rick
Are you referring to the orifice that re-fills the well or the discharge ports?
-
Are you referring to the orifice that re-fills the well or the discharge ports?
I'm referring to the discharge ports, or as in the spec sheets that Kenth supplies, they're referring to them as the secondary accelerator nozzle, at least that's what I believe it's referring to.
Everyone has a different name for stuff, it can be confusing at times.