Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Buy Quadrajet Parts, Quadrajet Kits, Service => Topic started by: Cliff Ruggles on January 20, 2009, 04:33:26 AM

Title: Back to work, finally!
Post by: Cliff Ruggles on January 20, 2009, 04:33:26 AM

Due to some complications from recent surgury, I've been out of the shop since December 12th.  Nothing all that serious, but I sceduled to have a tumor removed over the holidays, and ended up having some troubles that kept me off work until this week.

Good news is that we are back in the shop and getting things done again.  We also had a hard drive crash, and were off line for several days.  We lost all of our email contacts, and messages from earlier this month.  If you tried to email us, and didn't get a response, please try again, as we always answer all emails.

Also keep in mind, that some emails come back to us "not deliverable", for various reasons.  If you don't get a reply, we either didn't get the email, or the response was not able to be delivered to your account.

I'm not sure why this happens, but we always reply to all emails.

We are not able to return all phone calls to the shop, there simply isn't enough time.  If you are calling for tuning advice, or for help troubleshooting specific problems, etc, try posting the problem on the Forum.  We try to return all calls for parts, so always leave us some good phone numbers and best time to call them....thanks....Cliff

Title: Re: Back to work, finally!
Post by: Mr.Pontiac on January 21, 2009, 09:10:05 PM

Holy cow, i didn,t know that, where was tumor at?? everything ok?? I changed those jets to 65,s and now i need thoses custom sec. rods, what do you need from me?? I have  about 4 used sets, are you making new ones?? Tell me whats going on, Your the man keep us informed, Wishing you the best!!

Title: Re: Back to work, finally!
Post by: Cliff Ruggles on January 23, 2009, 06:14:51 AM

We have new secondary metering rods in stock, they are .044" tips, rich taper.  I can machine any other sizes you would want...thanks....Cliff

Title: Re: Back to work, finally!
Post by: jamesF on January 23, 2009, 01:55:24 PM

Wishing you all the best Cliff. Let me know if you need anything else.

Title: Re: Back to work, finally!
Post by: Cliff Ruggles on January 24, 2009, 04:39:04 AM

Thanks, I'm finally healed up from the surgury thing, and feeling great.  Too bad it's only 18 degrees outside, a long ride on my Road King would do wonders for my recovery!......Cliff