Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: tommieboy on June 11, 2011, 12:01:22 PM

Title: fuel filter housing
Post by: tommieboy on June 11, 2011, 12:01:22 PM

I have a handful of Quadrajet's that are sitting in storage for future use. Is there anything I can coat the fuel filter housings treads with to prevent it from binding to the receiver threads in the carburetor body. I'd rather not store the two separated from each other as then the treads would definitely be exposed to the elements and possible damage.

Thanks,

Tommy

Title: Re: fuel filter housing
Post by: Cliff Ruggles on June 11, 2011, 06:17:07 PM

A tiny bit of anti-seize or grease would be fine....Cliff

Title: Re: fuel filter housing
Post by: tommieboy on June 11, 2011, 09:07:22 PM

Thanks Cliff.....

Tommy