Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: horsepowerfreek on January 30, 2012, 01:49:14 PM

Title: secondary metering rod hangers
Post by: horsepowerfreek on January 30, 2012, 01:49:14 PM

Hi Cliff:
Do you carry an assortment of secondary hangers?
Randy

Title: Re: secondary metering rod hangers
Post by: Cliff Ruggles on February 02, 2012, 04:21:32 AM

I just made up a gauge years ago from a piece of flat bar, marked it from lowest to highest, and bend them accordingly.  Keeps from having to stock a LOT of hangers which are difficult and expensive to maintain, and at most I'll get 1 or 2 calls a year for one....Cliff

Title: Re: secondary metering rod hangers
Post by: jjr on February 08, 2012, 06:39:43 PM

 I was curious about hanger specs and finally found a
reference and made up a chart...

(http://www.301garage.com/forum_pics/Carb_Hanger_Info.jpg)

 Joe

Title: Re: secondary metering rod hangers
Post by: Ethan1 on February 08, 2012, 09:49:01 PM

Quote from: jjr on February 08, 2012, 06:39:43 PM

I was curious about hanger specs and finally found a
reference and made up a chart...

(http://www.301garage.com/forum_pics/Carb_Hanger_Info.jpg)

 Joe

 Thanks for sharing, Joe. :)