Cliff's Quadrajet Parts and Rebuild Kits

General Category => Quadrajet Carb Talk and Tips => Topic started by: redman76 on March 23, 2012, 11:35:16 AM

Title: Help identifying parts in HP kit
Post by: redman76 on March 23, 2012, 11:35:16 AM

I received the HP kit and have two small parts that I'm trying to identify where they go.  One is a small cork washer/seal and the other looks like a plastic bushing (roughly same diameter as cork washer) with a groove cut into it.  Can anyone tell me where these go?

Title: Re: Help identifying parts in HP kit
Post by: Cliff Ruggles on March 26, 2012, 04:30:37 AM

The cork seal is for the HIC located in the rear of the main casting under a metal cover, or Hot Idle Compensator, not used on all models.

The plastic collar is for the power piston, to retain it in the bore during installation....Cliff

Title: Re: Help identifying parts in HP kit
Post by: redman76 on March 26, 2012, 06:33:00 PM

Thanks again Cliff!!!