Cliff's Quadrajet Parts and Rebuild Kits
Quadrajet Problem Solving => Buy Quadrajet Parts, Quadrajet Kits, Service => Topic started by: 429bbf on April 21, 2012, 10:46:30 AM
-
cliff got a carb 17085213 some one has bored the channel restrictors to .068 . do you have blanks that i guy can drill?and can you leave the old one in and drive the new ones in on top to the proper depth is there enough room or will it cause a problem?im able to do what ever you say is best. thanks in advance.dean
-
Yes, we have drive in air bleeds and idle channel restrictors.
The best method I've found to remove the old ones, is to spin them out with a drill bit that just catches the inner edge of them. Around .112" from what I can remember?....Cliff
-
thanks cliff. i tried it 2 ways both worked good . i drilled one and used a 6-32 hard interior screw for the trim in my car on the second one.thanks for sharing your time and knowledge. dean