Cliff's Quadrajet Parts and Rebuild Kits

Quadrajet Problem Solving => Buy Quadrajet Parts, Quadrajet Kits, Service => Topic started by: 89SS196 on February 17, 2015, 05:55:39 PM

Title: ordering please
Post by: 89SS196 on February 17, 2015, 05:55:39 PM

Hey bud, long time...I haven't done a carb in a while.  I do again thank you for how well my boat carb turned out.

Now I am rebuilding a quadrajet for one of the techs at my work.  It's from a 1981 Z28 with stock 350, believe the trans is standard, but I can ask if it matters. 
I am going to need to do the primary throttle shaft bushings, a normal rebuild and a pair of idle tubes.
The carb # is  17059243 2018 CKD.  I have it torn down, it's in good condition.  I'd like it if you can supply me with rubberized vacuum port caps too, there are 3 or 4 of those along the front of the throttle plate.

What can you tell me?

Thanks, Peter

Title: Re: ordering please
Post by: Cliff Ruggles on February 22, 2015, 05:29:17 AM

Best to call or email the shop directly for kits and parts.  740-397-2921 or cliffshp@embarqmail.com

thanks...Cliff

Title: Re: ordering please
Post by: 89SS196 on February 22, 2015, 04:36:19 PM

thanks