Cliff's Quadrajet Parts and Rebuild Kits
General Category => Shop News => Topic started by: Cliff Ruggles on May 14, 2023, 05:55:05 AM
-
I was out of bushing kits for a while due to increased demand. They are now back in stock and I have plenty of them. My bushing kits are very easy to use and you don't need a Bridgeport, Drill Press or even a shop vise. All that you need is a 3/8" hand drill and the ability to grind off the staked portion of the throttle plate screws.
I stock bushing kits for 5/16" and 3/8" throttle shafts. You will need a 1/2" drill for the larger 3/8" kit but it is just as easy to use as the smaller one.
Here is a link to the bushing installation kits:
https://cliffshighperformance.com/product/5-16-throttle-shaft-bushing-kit
https://cliffshighperformance.com/product/3-8-throttle-shaft-bushing-kit