« previous next »
Pages: [1]   Go Down

Author Topic: Evap port for M4M  (Read 2353 times)

Offline Shark Racer

  • Jet Head
  • ****
  • Posts: 288
Evap port for M4M
« on: June 05, 2013, 06:03:47 PM »
Just got an M4M for a friend but it's missing the evap port. Looks like the tube is 3/8" but the hole in the main body is only .335. Does this make sense?

Anyone know how/where I can source something like this?
Logged

Offline 429bbf

  • Qjet Hero
  • *****
  • Posts: 539
Re: Evap port for M4M
« Reply #1 on: June 06, 2013, 09:02:59 PM »
my son just bought me 10 more carbs let me check this weekend if one of them has something to help you.
Logged

Offline Shark Racer

  • Jet Head
  • ****
  • Posts: 288
Re: Evap port for M4M
« Reply #2 on: June 07, 2013, 01:50:42 PM »
Thanks. Much appreciated. It's the one just under the front airhorn screw, points down and to the driver's side.
Logged

Offline 429bbf

  • Qjet Hero
  • *****
  • Posts: 539
Re: Evap port for M4M
« Reply #3 on: June 08, 2013, 08:48:38 PM »
i dug threw at least 40 carbs 20 of them had the piece your looking for . BUT they all measure about .371 to .373 if it was mine id drill it .if you dont have one .371 or so ill give you one . buy the way whats the carb no.?
Logged

Offline Shark Racer

  • Jet Head
  • ****
  • Posts: 288
Re: Evap port for M4M
« Reply #4 on: June 09, 2013, 12:00:49 AM »
I'll double check my measurements but can't believe I was off .040 with a mic.

It's a 17080270 - for a 80 Firebird 301 W72 (non-turbo)
Logged

Offline Shark Racer

  • Jet Head
  • ****
  • Posts: 288
Re: Evap port for M4M
« Reply #5 on: June 09, 2013, 12:46:40 AM »
Well I was off -  got 367. must have had the mic xxxxed or something.
Logged

Offline 429bbf

  • Qjet Hero
  • *****
  • Posts: 539
Re: Evap port for M4M
« Reply #6 on: June 09, 2013, 06:04:52 AM »
ha ha before i got glasses all my tools read wrong.do you need the piece?i have one out of a late model electronic carb.
Logged
Pages: [1]   Go Up
« previous next »