« previous next »
Pages: 1 [2]   Go Down

Author Topic: lean spot when coming into the secondaries  (Read 5336 times)

Offline Marx3

  • Jet Head
  • ****
  • Posts: 306
Re: lean spot when coming into the secondaries
« Reply #15 on: September 07, 2016, 12:44:00 PM »
Can't remember. Stock for the carb.
Bent it slightly to get a safer wot AFR with CH rods. ( AFR right around 12.5:1)
Logged

Offline Marx3

  • Jet Head
  • ****
  • Posts: 306
Re: lean spot when coming into the secondaries
« Reply #16 on: September 08, 2016, 07:57:58 AM »
J hanger.
Unsure if they are in fact CH's. They have long .052 tips.
I put in some other rods, about the same tip size, but with a shorter tip and with a longer tapered portion. AFR showed 10:1 at wot, so I gotta do some tweaking. I'll measure AFR to see if that lean spot is still there with these new rods.
Logged
Pages: 1 [2]   Go Up
« previous next »