« previous next »
Pages: [1]   Go Down

Author Topic: Primary throttle shaft side play  (Read 3325 times)

Offline kjvforme

  • Newbie
  • *
  • Posts: 3
Primary throttle shaft side play
« on: May 08, 2009, 10:47:28 AM »
What is to much side play on the throttle shaft before it needs to be bored and bushings installed?  I have a dial indicator wondering the readings that you go by.
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Primary throttle shaft side play
« Reply #1 on: May 13, 2009, 06:29:32 AM »
They all need bushings, as the factory clearances are simply too great and can allow unfiltered air to enter the engine, not to mention are a slight vacuum leak at idle and effect tuning, etc.

Our kit reduces primary throttle shaft play to less than .001".....Cliff
Logged

Offline kjvforme

  • Newbie
  • *
  • Posts: 3
Re: Primary throttle shaft side play
« Reply #2 on: May 16, 2009, 08:49:31 PM »
Wouldn't less than .001 be concidered an interference fit?  How do you keep the shaft lubricated when it's that tight?
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Primary throttle shaft side play
« Reply #3 on: May 17, 2009, 06:21:07 PM »
The bushings we use are self lubricating, some sort of oil impregnated bronze material....Cliff
Logged
Pages: [1]   Go Up
« previous next »