Author Topic: choke sticks  (Read 2587 times)

Offline bob hoover

  • Newbie
  • *
  • Posts: 2
choke sticks
« on: August 02, 2009, 01:12:11 PM »
After a hot run then cool down choke will not close. I can push the throttle all the way down nothing. I manually move the fast idle cam it works you can try it a hundred times hit the gas the choke closes. Go out for a ride come back try to start in a couple days stuck open again. Any suggestions would be appreciated. 1969 442 all original carb# 7029251

Offline Schurkey

  • Carb lover
  • ***
  • Posts: 157
Re: choke sticks
« Reply #1 on: August 02, 2009, 05:37:10 PM »
First thing I'd do is hope for a "chemical miracle" in the form of aerosol carb spray.  If the carb spray cleans the linkage, fast idle cam pivot; and choke blade pivots and afterwards everything works good--you're done.  God Bless Carb Spray.

If the carb spray DOESN'T fix the problem, I'd be looking for bent/binding linkage pieces or a choke coil that's either adjusted too lean or no longer has any tension.
Demand compensation from Communist China for the damage done by the Virus Originating in the Wuhan Lab, released (intentionally or negligently) into the world in 2019 (VOWL-19).  Trillions of dollars, plus direct compensation to individuals for medical bills, and "wrongful death" settlements.

Offline comp

  • Garage guy
  • **
  • Posts: 34
Re: choke sticks
« Reply #2 on: August 05, 2009, 10:48:59 PM »
let us know

Offline bob hoover

  • Newbie
  • *
  • Posts: 2
Re: choke sticks
« Reply #3 on: August 06, 2009, 06:10:20 PM »
I sprayed wd on it because the carb is very clean.  I worked it up and down many times had the same problem. I even took the screw that holds the assembly together and loosened it a little bit thinking that might help from binding. I still have the same problem.
« Last Edit: August 06, 2009, 06:13:02 PM by bob hoover »