Quadrajet Bushing Kits in stock

[Cliff Ruggles]

I was out of bushing kits for a while due to increased demand.  They are now back in stock and I have plenty of them.  My bushing kits are very easy to use and you don't need a Bridgeport, Drill Press or even a shop vise.   All that you need is a 3/8" hand drill and the ability to grind off the staked portion of the throttle plate screws. 

I stock bushing kits for 5/16" and 3/8" throttle shafts.  You will need a 1/2" drill for the larger 3/8" kit but it is just as easy to use as the smaller one.

Here is a link to the bushing installation kits:

https://cliffshighperformance.com/product/5-16-throttle-shaft-bushing-kit

https://cliffshighperformance.com/product/3-8-throttle-shaft-bushing-kit