« previous next »
Pages: [1]   Go Down

Author Topic: Sticking Secondary Throttle Plates  (Read 2595 times)

Offline von

  • Carb lover
  • ***
  • Posts: 177
Sticking Secondary Throttle Plates
« on: April 06, 2013, 03:35:59 AM »
They are sticking shut in the bores. No obvious burrs, rough edges, etc. Not caused by linkage (slightly loose as desired). Tried loosening screws and re-centering plates to no avail. What is the cure?
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Sticking Secondary Throttle Plates
« Reply #1 on: April 06, 2013, 04:21:21 AM »
Gently polish the bores with fine auto body sandpaper, and the edges of the throttle plates, they re-center and index the shafts, they should be fine....Cliff
Logged
Pages: [1]   Go Up
« previous next »