« previous next »
Pages: [1]   Go Down

Author Topic: 800 cfm Buick on a 0.030 over 400  (Read 2157 times)

Offline vanmor

  • Newbie
  • *
  • Posts: 3
800 cfm Buick on a 0.030 over 400
« on: February 16, 2012, 12:36:18 AM »
I have a 800 cfm Buick carb I'd like to use on my newly rebuilt Pontiac 400.

Engine  and drive train as follows:

Bored 0.030
Summit 2801 (068 type) cam
6X-4 heads (lightly ported and shaved 0.040)
Performer Intake
Stock HEI conversion
Three tube headers and 2 1/2" exhaust with x-pipe / tailpipes
Turbo 400 with modified valve body (drilled)
3:55 "peg leg" rear end

Carb #7043240

Car to be street driven with some drag strip action. (Goal is 13.7 seconds in 1/4 mile.)

Since the carb needs a complete rebuild, what parts are needed ? Do I stick with the stock jets and rods ?

I have Cliff's book.


Logged

Offline vanmor

  • Newbie
  • *
  • Posts: 3
Re: 800 cfm Buick on a 0.030 over 400
« Reply #1 on: February 16, 2012, 04:03:57 PM »
Looks like I posted this in the wong slot.

Anyway,  I'll answer my own question. The shape this carb is in, just about everything needs to be replaced.

I'll have to identify my jets and hangers. Then go from there.
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: 800 cfm Buick on a 0.030 over 400
« Reply #2 on: February 17, 2012, 04:50:37 AM »
It will need some help for what you are doing.  Calibration is close.  Best to just call the shop when you are ready to do the build, and we'll supply what you need to set it up for what you are doing...thanks...Cliff
Logged

Offline vanmor

  • Newbie
  • *
  • Posts: 3
Re: 800 cfm Buick on a 0.030 over 400
« Reply #3 on: February 17, 2012, 07:07:27 AM »
Sounds like a winner Cliff.

At 9 to 1 compression, I'm probably asking a lot from this combo.

Oh I forgot, I'm runiing a stock type converter.

I'll give you guys a call.
Logged
Pages: [1]   Go Up
« previous next »