« previous next »
Pages: [1]   Go Down

Author Topic: Qjet Air Horn Gasket  (Read 2434 times)

Offline firebird*boz

  • Garage guy
  • **
  • Posts: 8
Qjet Air Horn Gasket
« on: March 18, 2012, 04:20:34 AM »
Hi all I recently rebuilt my Qjet Have now installed back onto engine but noticed that the gasket between the air horn & fuel bowl is wet ....(mostly at front of carb) is this normal??

any help would be great. Thanks adam
Logged

Offline Schurkey

  • Carb lover
  • ***
  • Posts: 157
Re: Qjet Air Horn Gasket
« Reply #1 on: March 18, 2012, 08:57:09 PM »
Pretty common.  The air horn and main body warp from over-tightened front bolts.  There isn't perfect pressure on the gasket any more.

Could relate to a high fuel level; or fuel frothing.

Does it actually leak, or just seep enough to wet the exposed part of the gasket?
Logged
Demand compensation from Communist China for the damage done by the Virus Originating in the Wuhan Lab, released (intentionally or negligently) into the world in 2019 (VOWL-19).  Trillions of dollars, plus direct compensation to individuals for medical bills, and "wrongful death" settlements.

Offline firebird*boz

  • Garage guy
  • **
  • Posts: 8
Re: Qjet Air Horn Gasket
« Reply #2 on: March 19, 2012, 01:15:48 AM »
Thanks fore reply....the exposed portion of the gasket is wet ...not leaking just wet kinda like a capillar action I gues?... is this normal or should i try to get a better seal between airhorn & fuel bowl?
Logged

Offline von

  • Carb lover
  • ***
  • Posts: 177
Re: Qjet Air Horn Gasket
« Reply #3 on: March 19, 2012, 03:04:38 AM »
They all do it.  Modern air horn gaskets wick gas. If you stick the edge of a new gasket vertically into a pan of gas, the gas will wick upwards through the gasket for as long as you hold the edge in the gas. I spent a lot of time and money chasing this problem on more than one carb, only to find out it's the gaskets.
Logged
Pages: [1]   Go Up
« previous next »