Author Topic: Cliff, 17056240 advice needed: A.s.a.p  (Read 2566 times)

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Cliff, 17056240 advice needed: A.s.a.p
« on: April 17, 2012, 04:17:56 PM »
Getting ready to get my GTO out for another year at the track, i need your advice on the main air bleeds on my carb. i checked them since last year and im getting .076, Cliff .078 won,t go in and the .076 is sloppy may be .077 seems large!! All your book states is .070. Is this a big problem?? Car really ran goof last year and shooting for the 12,s. Idling seems aratic untill it warms up a bit. No power piston, .068 jets, No choke, Running a I REAR HANGER, going to try a k with your rods i have now. Thanks so much as usual for all your advice.

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Cliff, 17056240 advice needed: A.s.a.p
« Reply #1 on: April 18, 2012, 10:06:14 AM »
From the factory that carburetor had much smaller MAB's.  Did you drill them out somewhere along the way?

The IAB's were pretty small in the upper part of the casting, and large lowers, from what I can remember?  They will "average" around .070" between the pair, so I don't recomend modifying them....Cliff

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Re: Cliff, 17056240 advice needed: A.s.a.p
« Reply #2 on: April 18, 2012, 11:54:37 AM »
Last year before i had car out i probably did along the way, may i ask, should i change them or leave them at .076???? If its worth anything im willing to try. Idling was always eractic when cold.

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Cliff, 17056240 advice needed: A.s.a.p
« Reply #3 on: April 23, 2012, 03:07:50 AM »
They wouldn't effect the idle quality, and no need to change them if you have tuned for that particular size....Cliff

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Re: Cliff, 17056240 advice needed: A.s.a.p
« Reply #4 on: May 11, 2012, 06:41:25 PM »
Cliff, double checking with you, i recieved the air bleeds and removed my top off the carb. noticed yours,were about .048 and after installing them i drilled them out to .070. Thats right what you wanted me to do correct??

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Cliff, 17056240 advice needed: A.s.a.p
« Reply #5 on: May 16, 2012, 04:31:34 AM »
That'll work....Cliff