Author Topic: Why do i have large main well tubes also???  (Read 2018 times)

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Why do i have large main well tubes also???
« on: June 29, 2013, 08:25:40 AM »
I ve only seen main well tubes with restrictions on the end but my top has the same size main well tubes as secondary main well tubes, All 4 tubes o.d. are same size. Will huge main well tubes hurt anything????

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Why do i have large main well tubes also???
« Reply #1 on: July 02, 2013, 04:26:42 AM »
Sounds like a 69-70 Pontiac carb with the primary POE system, they use 4 tubes the same diameter....Cliff

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Re: Why do i have large main well tubes also???
« Reply #2 on: July 02, 2013, 07:11:25 PM »
I see it mentioned page 106 looking quickly thru your book, so what does POE stand for and whats its function please. Thanks always for your input

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Re: Why do i have large main well tubes also???
« Reply #3 on: July 02, 2013, 07:21:18 PM »
I found it on page 85 but really don,t know how it works, pass along some info please??

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Why do i have large main well tubes also???
« Reply #4 on: July 03, 2013, 05:23:57 AM »
POE is Pull Over Enrichment, supplying fuel thru the tubes into the engine on the primary side with some airhorns, just like it does for the secondary side.

Primary side POE was used to allow for leaner jetting at cruise.  POE adds in fuel with quick throttle movements much like an accl pump to avoid a lean condition......Cliff