« previous next »
Pages: [1]   Go Down

Author Topic: Should I cap off this port?  (Read 1835 times)

Offline Jimpala

  • Garage guy
  • **
  • Posts: 10
Should I cap off this port?
« on: March 31, 2014, 06:29:07 PM »
Hey Guys,
Should I rubber cap off this port,pointing to it with pencil in pic?I believe my old charcoal canister hose was originally plugged in here.
It looks like it feeds into float/air horn vent area up into air horn.Carb#17059505. Thanks, Jim
Logged

Offline gwgdog66

  • Garage guy
  • **
  • Posts: 7
Re: Should I cap off this port?
« Reply #1 on: March 31, 2014, 08:46:39 PM »
That is the carb vent. Mine goes to the charcoal canister.
Logged

Offline Jimpala

  • Garage guy
  • **
  • Posts: 10
Re: Should I cap off this port?
« Reply #2 on: April 01, 2014, 03:59:31 PM »
Thanks I know it's for charcoal canister.My question is would it be ok to cap it off or should I leave it open?
Jim
Logged

Offline gwgdog66

  • Garage guy
  • **
  • Posts: 7
Re: Should I cap off this port?
« Reply #3 on: April 02, 2014, 09:55:43 PM »
I did once a long time ago, (1971 C-10)  and it cause some issue's. I wish I could remember what they were, I think it was flooding and erratic idle when it was warm.  I uncapped it and ran a hose from it to the bottom of my after market air cleaner and the problem stopped.
Logged

Offline novadude

  • Carb lover
  • ***
  • Posts: 87
Re: Should I cap off this port?
« Reply #4 on: April 04, 2014, 07:45:21 PM »
I always cap or plug them.  Never caused any issues that I've observed.  My thought is there is plenty of other places for the bowl to vent on a q-jet.
Logged
Pages: [1]   Go Up
« previous next »