« previous next »
Pages: [1]   Go Down

Author Topic: Rich at idle  (Read 2122 times)

Offline Ligfishing

  • Garage guy
  • **
  • Posts: 11
Rich at idle
« on: October 26, 2015, 06:30:27 AM »
Rebuilt using Cliff kit, all seemed smooth. Can get the idle down to 650. Nice and smooth running . Had the boat out to do some trolling and the exhaust is very stinky.  And a bit of fuel sheen on the water  at the slip.

Greg-
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5432
Re: Rich at idle
« Reply #1 on: October 28, 2015, 03:15:52 AM »
Did you set the float to the factory spec's?

Did you fine tune the mixture screws after the carburetor rebuild with the engine up to full operating temperature?.....Cliff
Logged

Offline Ligfishing

  • Garage guy
  • **
  • Posts: 11
Re: Rich at idle
« Reply #2 on: October 28, 2015, 08:44:30 AM »
Yes and Yes.

Greg-
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5432
Re: Rich at idle
« Reply #3 on: November 07, 2015, 04:57:34 AM »
If you have control with the mixture screws you should be able to set the idle in range so it's not "rich".  Turn them in till the engine just slows slightly, then back about 1/4 turn till it smooths out.....Cliff
Logged
Pages: [1]   Go Up
« previous next »