brass float

[17058263]

ok my oem float setting is 15/32 if i use a brass float do i use the same stting or lower it more sine it doesent float as well

[Cliff Ruggles]

I don't use the brass floats these days.  Way back when we did use them, we had a few develope leaks at the soldered joints and sink. 

They get the same setting as the standard type floats, but I wouldn't set one that low unless you are running really high fuel pressure......Cliff

[17058263]

i run 7.5 psi so what would be the best float level with the psi

[Cliff Ruggles]

I run 7.5 psi at the track with the same carburetor, and have the float set at exactly 1/4"....Cliff