FOUND - Wanted: 68-71 Pontiac primary shaft

[Jeffs68]

Looking for the primary shaft for a 68-71 Pontiac Qjet, I'll take the base plate and secondary shaft also if you don't want to separate them.

Send a PM if you have what I need.

Thanks!

[carmantx]

You can get these reproduction if you can't find good originals.

[Jeffs68]

Thanks, I do have the repro shaft. Junk chinese metal. The throttle moves smooth when COLD, but after the engine is warmed up the metal is expanding too much and binding. Won't return to idle unless you push back the throttle arm.

Tried it in 2 different base plates, both bushed and true. Both had the same results.

[Jeffs68]

bump

[Ethan1]

Looking for the primary shaft for a 68-71 Pontiac Qjet, I'll take the base plate and secondary shaft also if you don't want to separate them.

Send a PM if you have what I need.

Thanks!

 Have you tried contacting Mr. Pontiac? He may have what you need.

[Jeffs68]

Have you tried contacting Mr. Pontiac? He may have what you need.

Thanks Ethan, I'll send him a message.

[Jeffs68]

Mr. Pontiac (Rich) came through, got the part I needed!

[Ethan1]

Mr. Pontiac (Rich) came through, got the part I needed!

 Great to hear, Jeff! I knew he would.