Author Topic: 17085212  (Read 4970 times)

Offline 77cruiser

  • Qjet Hero
  • *****
  • Posts: 599
17085212
« on: January 11, 2017, 07:08:42 PM »
Specs for another Ebay carb. Thanks, in advance. Don't really know why I bought but it looked pretty clean in the pics, missing some linkage is all.
Jim

Offline 429bbf

  • Qjet Hero
  • *****
  • Posts: 539
Re: 17085212
« Reply #1 on: January 11, 2017, 07:37:20 PM »
jim i like them carbs , i don't remember the specs ethan probably has them , the ones i had came off 1 ton big block 454  chevy cab and chassis. they had an extra hole in the base plate that went up into the  back side if the secondaries. i talked to cliff and he said it was ok to plug , so i tapped the base plate and bearing mounted a 5/16 i believe  allen head in it .turned out very nice i installed them back on same engine , cleaned up all the smog crap and they made great power and good milage. fwiw

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17085212
« Reply #2 on: January 12, 2017, 03:04:58 AM »
Specs for another Ebay carb. Thanks, in advance. Don't really know why I bought but it looked pretty clean in the pics, missing some linkage is all.

 You have to remember, after 1980 they didn't put the numbers in the books for specific metering rods and jets. Just a metering rod and jet kit. But, I found some online info that shows:

 .075" Jets
 58S Primary Metering Rods
 EF Secondary Metering Rods
 
Ethan

1972 Chevelle

(oo______oo)

Offline 77cruiser

  • Qjet Hero
  • *****
  • Posts: 599
Re: 17085212
« Reply #3 on: January 12, 2017, 06:02:03 AM »
I forgot you had said that. I searched on the 58 s rods & saw that Cliff had done one about 4 years ago.
Thanks for your knowledge Ethan.
Jim

Offline carmantx

  • Carb lover
  • ***
  • Posts: 182
  • Quadrajet Power.com
    • Quadrajet Power
Re: 17085212
« Reply #4 on: January 12, 2017, 07:09:46 AM »
My notes show it to be a single main, 800 cfm hot air choke Quadrajet.
I pulled 76 jets and 50S rods in one. And DA secondary rods.  Not sure if these were original.
'72 Buicks for fun and drag racing
quadrajetpower on facebook

Offline 77cruiser

  • Qjet Hero
  • *****
  • Posts: 599
Re: 17085212
« Reply #5 on: January 12, 2017, 09:40:46 AM »
Thank you.
Jim

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17085212
« Reply #6 on: January 12, 2017, 07:34:42 PM »
My notes show it to be a single main, 800 cfm hot air choke Quadrajet.
I pulled 76 jets and 50S rods in one. And DA secondary rods.  Not sure if these were original.

 That could be true. I don't have one in front of me right now, so I am not sure what it came with originally. I absolutely HATE giving out random information. Sorry, Jim.
Ethan

1972 Chevelle

(oo______oo)

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17085212
« Reply #7 on: January 12, 2017, 07:40:41 PM »
My notes show it to be a single main, 800 cfm hot air choke Quadrajet.
I pulled 76 jets and 50S rods in one. And DA secondary rods.  Not sure if these were original.

 Just looked back at my notes on here and I was ALMOST correct, Jim. :P

 Here are the correct specs:

  .075" Primary Jets
 61S Primary Metering Rods
 EF Secondary Metering Rods

 These are from a 17085213 Q-Jet. Basically the same setup though. 8)
Ethan

1972 Chevelle

(oo______oo)

Offline 429bbf

  • Qjet Hero
  • *****
  • Posts: 539
Re: 17085212
« Reply #8 on: January 13, 2017, 04:59:49 PM »
ethan nice that you have a lot of info checked my notes they were 75 and 57 i find most of the 213 on chevy with 350 engine pickups and 212 on chevy with 454 don't know if This helps anyone .

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17085212
« Reply #9 on: January 14, 2017, 02:55:03 PM »
ethan nice that you have a lot of info checked my notes they were 75 and 57 i find most of the 213 on chevy with 350 engine pickups and 212 on chevy with 454 don't know if This helps anyone .

 Well, the metering rod and jet kit is the same for both carbs. 17111346. Which I looked up and found an old eBay ad with the parts in it. :D
Ethan

1972 Chevelle

(oo______oo)

Offline 429bbf

  • Qjet Hero
  • *****
  • Posts: 539
Re: 17085212
« Reply #10 on: January 17, 2017, 07:51:32 PM »
Ethan, i love a good discussion  thats whats great about this forum, why do you think they would put the same jet and needles in those 2 engines , you can throw a 350 in the carb of a 454 , where is all the fuel coming from to feed the monster no pun intended , I'm just trying to figure out gm,s thinking.

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: 17085212
« Reply #11 on: January 17, 2017, 11:42:42 PM »
Ethan, i love a good discussion  thats whats great about this forum, why do you think they would put the same jet and needles in those 2 engines , you can throw a 350 in the carb of a 454 , where is all the fuel coming from to feed the monster no pun intended , I'm just trying to figure out gm,s thinking.

 No, I completely understand your point of view. Maybe it was different in the 80s. What I mean is different size passage ways. I don't know, Jeff. Your guess is better than mine.
Ethan

1972 Chevelle

(oo______oo)

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5347
Re: 17085212
« Reply #12 on: January 18, 2017, 03:16:55 AM »
The 17085212 and 17085213 carburetors are heavy duty 454 Motorhome units.  They were set up for 454 towing engines, and tuned completely differently than other q-jets from that period.  They also take special gaskets and rebuild parts, so you may find them working poorly unless the correct parts were installed during the rebuild........Cliff

Offline 429bbf

  • Qjet Hero
  • *****
  • Posts: 539
Re: 17085212
« Reply #13 on: January 18, 2017, 09:14:54 AM »
thanks cliff , i knew somebody had the answer .