Who makes a cheap carb stand?

[Burd]

Looking for a carb stand, I see one for around $65.  I’d just like a plastic one.  Anyone know any?

[Kenth]

This and a some 5/16" x 3" UNC screws, washers and nuts will make a nice stand.

https://www.summitracing.com/parts/sum-g1401

[quadrajam]

Thats exactly what I use. 

[77cruiser]

I have one of these too.

https://www.summitracing.com/parts/mor-62070

[Burd]

Thanks, never thought about making one form a spacer.   Big swap in a week here, I’ll keep an eye out for a cheap one.

[novadude]

I have one of these too.

https://www.summitracing.com/parts/mor-62070

Same one that I use, but I seem to recall them being much cheaper when I bought mine.

[Greasy Harley]

I use a piece of plywood with 4 bolts sticking out of it.
I routered the edges, and painted it (It's pretty fancy).
It cost about zero dollars and has been used to successfully rebuild at least 20 Q-jets.

[Burd]

At the big swap last week, I couldn’t find one for sale.   Even with all the tool guys now there. 

[77cruiser]

I made one out of a heat insulater carb to manifold gasket.

[SoonerD]

I made one in about 30 minutes with a spare piece of plywood and about $8 worth of fasteners from ACE Hardware.

[GSP7]

This and a some 5/16" x 3" UNC screws, washers and nuts will make a nice stand.

https://www.summitracing.com/parts/sum-g1401

Yep same hear,,,, was shopping for a stand $$$$ and I already had a MrGasket spread bore adapt or

Works great

[Burd]

Cheapest one I found $32, shipping included

[DV657172]

Definitely not the cheapest but I really like this one I got from Summit. It can be changed around to fit different bolt patterns

https://www.summitracing.com/parts/sum-g1429