« previous next »
Pages: [1]   Go Down

Author Topic: Popping out Exhaust  (Read 1229 times)

Offline DC AUTOMOTIVE

  • Newbie
  • *
  • Posts: 2
Popping out Exhaust
« on: May 27, 2023, 09:02:00 AM »
Truck is a 1985 C2500 with a 350 engine.  Odometer says 68000.  Recently rebuilt the carburetor.  The truck runs great except that if you go 3/4 to full throttle, and then let off the gas quickly, it pops out the exhaust.  Sometimes 1 pop.  Sometimes multiple pops.  We are just starting to get into carburetors, so we know the basics.  Any help would be greatly appreciated.

Thanks
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Popping out Exhaust
« Reply #1 on: May 29, 2023, 01:42:12 AM »
What kit did you use?
Logged

Offline DC AUTOMOTIVE

  • Newbie
  • *
  • Posts: 2
Re: Popping out Exhaust
« Reply #2 on: May 30, 2023, 06:56:04 AM »
It was a Walker kit from O'reilly's  #151038A
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Popping out Exhaust
« Reply #3 on: May 31, 2023, 03:52:38 AM »
Those kits are bottom of the barrel.  The hole in the fuel inlet seat is too small.  The seal on the pump is garbage and you didn't get a secondary cam/spring in the kit or a retainer for the power piston.

If you are experiencing problems at heavy/WOT the problem could be a number of things.  I'd start here:

https://cliffshighperformance.com/product/quadrajet-rebuild-kit-sr

This is a complete kit and will get the carb up to par in every area plus lifetime warranty on the N/S assembly and accl  pump......
Logged
Pages: [1]   Go Up
« previous next »